Watch Movement Finder: Which Calibre Is In Your Watch?

Daniel Hart · ·

You can identify most common movements without opening the case. Whether the seconds hand stops when you pull the crown, whether the watch hand-winds, and how many steps the seconds hand takes each second together rule out almost everything.

Answer what you can see and skip what you cannot. Each answer narrows the field.

Answer what you can observe without opening the watch. Each answer narrows the field. Movements you can rule out disappear; what remains is what could be inside.

1. The seconds hand
2. Pull the crown out. Does the seconds hand stop?
3. With the crown pushed in, can you wind it by turning?
4. What the dial shows
5. Count the seconds-hand steps in one second
6. Origin, if the dial or caseback says

As an Amazon Associate, Watch The Watch earns from qualifying purchases at no extra cost to you. Tool outputs are guidance, not a substitute for the manufacturer’s official specs.

Frequently asked

Can I identify a watch movement without opening it?

Usually yes for common calibres. Hacking, hand-winding, the calendar layout and the number of seconds-hand steps per second together rule out most of the field.

How do I count the beat rate by eye?

Watch the seconds hand for one second and count the steps. Six steps means 3 Hz or 21,600 vibrations per hour; eight steps means 4 Hz or 28,800.

Which common movement does not hack?

The Miyota 8215 hand-winds but does not hack, and Seiko’s older 7S26 and 7S36 do neither. That combination is the fastest way to identify them.

How can I tell a Sellita SW200-1 from an ETA 2824-2?

Through a display caseback, by jewel count: the Sellita has 26 and the ETA has 25. They are otherwise dimensionally interchangeable, which is the whole point of the design.

What if nothing matches?

Either one observation is off, or the calibre is outside the common movements in this set. In-house calibres from larger brands are not listed here.

Scroll to Top